Thank you for your feedback!

We strive to improve our website to meet your needs.
Your feedback and opinion is very important to us!

  • Did you discover a bug in the system?
  • How can we improve our website?
  • What other information or functions could be useful?

Thanks for you feedback an suggestions!

Send

Newsletter

Yes, I would like to receive the Newsletter on Alutronic products and technical news. I can cancel my subscription anytime.

E-Mail*
Vorname
Nachname
Newsletter
WK800-A-10ml
 
 
 
 

WK800-A-10ml

product features

Pieces/ Unit 10ml Pinselflasche
Material anaerob-nicht toxisch

show more...
 
 
 
 
 
 

product information "WK800-A-10ml"

activator is available as a 10 ml bottle with brush!

The components are not mixed. It suffices to apply a small quantity of the adhesive (WK800-D-4ml or WK800-D-25ml) on one of the surfaces to be bonded and smearing the other adhesive surface with the activator.
The surfaces are joined by pressing them together. It is possible to make a correction within 15-30 seconds. The adhesion is sturdy after 5 minutes at room temperature and cures within 24 hours completely.

Max. adhesive gab: 0,25 mm
Shear strenght: 5,5 N/mm2
Tensile strenght :15,2 N/mm2
Thermal expansion coefficient: 110 ppm/K
Thermal conductivity: 0,76 W/mK
Dielectric Strenght: 26,78 kV/mm
Flammability: V-0
Processing temperature: 20-28 °C
Temperature range -55 - +150 °C
Storability temperature: 8 - 28 °C
Storability at 22 °C: min 3 Years
The product can be used after opening for 1 year.

Fertility:
1ml WK800-D = 100cm² / at 0,1mm application
1ml WK800-A = 200cm² / at 0.1mm application


WK800-D
Rule of thumb: Adhesive quantity per 1 cm2 = 1cm * 1cm * 0.01cm = 0.01cm3 corresponds to 0.01ml
The smallest tube WK800-D (4ml) is sufficient for approx. 400 adhesive surfaces of 1cm2 each
with an assumed adhesive thickness of 0.1mm.

WK800-A
A vial of 10ml (equivalent to 10 cm3) is enough for approx. 2000 adhesions.
1 vial activator (10ml) is enough for 5 tubes Dissipator each 4ml.
The fertility of the activator is therefore at least 2 times higher than that of the adhesive itself.

As soon as you do not apply 0.1mm but 0.2mm, the amount halves.